mbed Motherboard

TCH Technologies produced a couple of motherboards for the mbed development board. These are based on the LPC1768 processor. You can see the specs here: https://os.mbed.com/platforms/mbed-LPC1768/

The board included two CAN channels, so included sets of CAN transceiver 2xRJ45 and termination. In addition, the mbed has built-in Ethernet so there was an RJ45 for that, too. It included a power regulator.

Unfortunately, this was only prototypes and never a product — but could be reproduced if wanted.

Stuffed board with an mbed ready to be installed.

Reverse side of the board.

The mbed installed.