OpenLCB Dev Kit

You are here:
< Back

In order to have some standard hardware for OpenLCB developer to work with, we designed the Io boards, and put together a kit of parts:

  • 3 x Io by Railstars
  • USBCAN adapter by TCH Technologies
  • 4 x CAT5 cables
  • Serial programming adapter
  • USB cable
  • ButtonLED board

These were distributed at (below) cost. I still have a (very) few Ios left.

Dev Kit contents.

ButtonLED8 – a small peripheral board, with 8 buttons and 8 LEDs, designed to connect to either the 8 inputs, or 8 outputs, on the Io board. It also could be connected to the 2×5 sockets by a ribbon cable.

Last Updated On March 03, 2019